Introduction:
IEC60529 Ipx3 Ipx4 Oscillate Tube Testing Machine is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage.
IEC60529 Ipx3 Ipx4 Oscillate Tube Testing Machine have spray holes over 120 ° Of the tube for IPX3 and over the full 180 ° For IPX4. In IPX3 the tube will oscillate to 60 ° Either side of the vertical. For IPX4 the tube travels through an angle of almost 360 ° The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens
Features:
Touch screen controller
Oscillating tubes are stainless steel
Stainless steel nozzles removable for cleaning or replacing
Nozzles can be turned on or off to adjust the arc of the spray from the tube
Water supply unit includes water filter, pump, flow meter, electromagnetic valve and switch valve.
Two available flow rates to meet major standards
Oscillating tube angle can be adjusted freely from 40 ° To almost 360 °
Stainless steel specimen support with easy height adjustment and two specimen bases
Technical Parameter:
IEC60529 Ipx3 Ipx4 Oscillate Tube Testing Machine is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage.
IEC60529 Ipx3 Ipx4 Oscillate Tube Testing Machine have spray holes over 120 ° Of the tube for IPX3 and over the full 180 ° For IPX4. In IPX3 the tube will oscillate to 60 ° Either side of the vertical. For IPX4 the tube travels through an angle of almost 360 ° The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens
Features:
Touch screen controller
Oscillating tubes are stainless steel
Stainless steel nozzles removable for cleaning or replacing
Nozzles can be turned on or off to adjust the arc of the spray from the tube
Water supply unit includes water filter, pump, flow meter, electromagnetic valve and switch valve.
Two available flow rates to meet major standards
Oscillating tube angle can be adjusted freely from 40 ° To almost 360 °
Stainless steel specimen support with easy height adjustment and two specimen bases
Technical Parameter:
Power supply | 220V 50Hz or 110V 60Hz |
Control system | PLC control, touch screen operation |
Tube angle | 20° to almost 180° of both sides of vertical (adjustable) |
Nozzle | 0.4mm(0.8mm nozzle as option) |
Water Pressure | 80~100kPa |
Specimen Support Diameter | 700mm |
Specimen support Height | 855-1300mm (adjustable) |
Specimen Support Max Loading | 100kg |
Flow speed | 0.4mm nozzle: 0.07l/ min. ±5% 0.8mm nozzle: 0.6l/min. ±5% |
Timer | 1-999 minutes, auto stop |
Weight | 150kg |
Oscillation Tube Radius | R200/400/600/800/1200mm or can be customized |
Our products include: Temperature and Humidity Test Equipment, Glow wire tester, Needle flame tester, horizontal and vertical burning tester, tracking tester, textile burning tester, protective clothing thermal conductivity tester, automotive interior combustion tester, melt dripping tester, building materials flammability tester, friction tester, test finger, spring hammer, universal testing machine and other testing instruments.
AUTOSTRONG(www.hkautostrong.com) is the eligible testing and measuring equipment supplier which has been recommended by IECC. It's one of leading enterprises in Hong Kong specialized in the R&D and manufacture of testing instruments, with more than 60 researchers from foreign countries, Hong Kong and Mainland China.
Please feel free to contact us for more details, or visit our new website : www.hkautostrong.com